Skip to content.

Selected Publications (2009-2013) 

  • C.P. Leither, J. Risan, M. Bashirzadeh, and F. Azarmi, Determination of the Elastic Modulus of Wire Arc Sprayed Alloy 625 using Experimental, analytical, and Numerical Simulation, Surface and Coating Technology, 235, pp. 611-619, 2013.
  • M. Salimi Jazi, A. Rezaei, G. Karami, and F. Azarmi, Biomechanical Parameters in Blast Brain Injury with and without Helmets, International Journal of Experimental and Computational Biomechanics, Available On Line: DOI: 10.1080/10255842.2012, 1/3/ 2013.
  • S. Javid, A. Rezaei, G. Karami, F. Azarmi, Micromechanics of Unidirectional Viscoelastic Fibrous Composites-Homogenized vs Local Characterization, Journal of Multifunctional Composites, Vol. 1, No. 1, pp. 35-48, 2013.
  • M. Bashirzadeh, F. Azarmi, C.P. Leither, and G. Karami, Investigation on Relationship between Mechanical Properties and Microstructural Characteristics of Metal Matrix Composites Fabricated by Cold Spraying Technique 275, pp. 208-216, 2013.
  • F. Azarmi, C.P. Leither, Microstructural Formation During Wire Arc Spraying of Alloy 625 on Wrought Alloy 625 Substrate, Metallurgical and Materials Transactions A: Volume 43, Issue 12, pp. 4703-4710, 2012.
  • M. Salimi Jazi, A. Rezaei, G. Karami1, F. Azarmi and M. Ziejewski; The Analysis of a Helmeted Human Head under Ballistic Impact Loads; Journal of Head Trauma Rehabilitation, Vol. 27(5), E40-E41, 2012.
  • H. Montazeri, F. Azarmi, T. W. Coyle, and J. Mostaghimi, An Analytical Technique for Optimization of Mechanical Performance of Foam Core Sandwich Structures, Journal of Materials Science Forum, Vols. 706-709, pp. 1373-1378, 2012.
  • F. Azarmi, and G. Karami, Effect of Substrate Temperature on Microstructural Characteristics of Thermal Sprayed Superalloy, Key Engineering Materials, Vol. 495, pp. 13-17, 2012.
  • Q. Zhou, Y. Wang, and F. Azarmi, A topography Characterization of Organic Coatings Degradation under Flowing Deionized Water, Journal of Materials Science and Engineering A1, Vol. 1, No. 5A, pp. 599-606, 2011.
  • F. Azarmi, Creep Properties of Nickel Aluminide Composite Materials Reinforced with SiC Particulates, Composites: Part B, 42, pp. 1779-1785, 2011.
  • F. Azarmi, T. Coyle, and J. Mostaghimi, Evaluation of the Flexural Rigidity of Sandwich Structures using Experimentally Obtained Mechanical Properties of the Constituent, Journal of Thermal Spray Technology, Vol. 19(1-2), pp. 429-438, 2010.
  • H. Liu, F. Azarmi, M. Bussmann, J. Mostaghimi, and T.W. Coyle, Experiments and Simulation of Rapid Solidification of Air Plasma Sprayed Alloy 625 on Stainless Steel, Surface and Coating technologies, 204, pp. 1521-1527, 2010.
  • F. Azarmi, J. Mostaghimi, T. W. Coyle, and L. Pershin, A New Approach to Develop High Temperature Foam Core Sandwich Structures using Air Plasma Spraying, International Journal of Advanced Manufacturing, Vol.44, No.9-10, pp. 900-905, 2009.
  • F. Azarmi, T. Coyle, J. Mostaghimi, Flexural Properties of Sandwich Beams Consisting of Air Plasma Sprayed Alloy 625 and Nickel Alloy Foam, Journal of Materials Science, Vol. 44, No. 11, pp. 2836-2843, 2009.
  • F. Azarmi, T. Coyle, J. Mostaghimi, Young's Modulus Measurement and Study of the Relationship between Mechanical Properties and Microstructure of Air Plasma Sprayed Alloy 625, Surface & Coatings  Technology, 203, pp. 1045-1054, 2009.

 

Selected Conference Proceedings (2009-2013) 

  • T. Chandanayaka and F. Azarmi, Investigation on Microstructural and Mechanical Properties of Cold Sprayed & P/M Processed Ni-Ni3Al Composites, ITSC 2013- Proceedings of the International Thermal Spray 2013, pp. 149-154, May 13-15, Busan, South Korea.
  • M. Salimi Jazi, A. Rezaeie, G. Karami, F. Azarmi, and M. Ziejewski, A Computtional Study on Biomechanics of Brain of A Helmeted Human Model Exposed to Blast Waves from different Orientations, 11th International Symposium of Computer Methods in Biomechanics and Biomedical Engineering, April 3-7, 2013, Salt Lake City, Utah, USA.
  • M. Salimi Jazi, A. Rezaeie, G. Karami, F. Azarmi, and M. Ziejewski, Study the Effects of Padding Materials on the Level of the Load in the Brain, ASME Conference NEMB2013, Feb 4-6, 2013 Boston, Massachusetts, USA.  
  • F. Azarmi, M. Bashirzadeh, C. Leither, and G. Karami, Investigation on Relationship between Mechanical Properties and Microstructural Characteristics of Metal Matrix Composites Fabricated by Cold Spraying Technique, Proceedings of the International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies, July 2-4, 2012, Alvor, Portugal. 
  • F. Azarmi, T. Chandanyaka, and M. Bashirzadeh, Cold Spraying Technique to Fabricate Ni-Based Metal Matrix Composite, Abstract Book of the NDSU-UND-SDSU Engineering Summit, April 23, 2012, Grand Forks, North Dakota, USA.
  • M. Bashirzadeh, F. Azarmi, G. Karami, Evaluation of Mechanical Properties of Cold Sprayed Al-%10 Cu Composite, Proceedings of the Conference on Engineering Materials: Evaluation, Flaw Detection and Processing (METLAB), May 17-19, 2012, South Dakota, Brookings, USA.
  • M. Salimi Jazi, A. Rezaie, G. Karami, F. Azarmi, and M. Ziejewski, Helmet-Head Interactions under Ballistic  Impacts- A Study on the effects of Padding, Proceedings of the Ninth Annual Conference on Brain Injury (NABIS), September 14-17, 2011 New Orleans, Louisiana, USA.
  • F. Azarmi, G. Karami, Effect of Substrate Temperature on Microstructural Characteristics of APS Deposited Alloy 625, Proceedings of International Conference for Materials and Applications for Sensors and Transducers, ICMAST-2011, May 13-17, 2011 Kos Island, Greece.
  • F. Azarmi, V.J. Gelling, and M. Yan, Corrosion Behavior of Air Plasma Sprayed Alloy 625 on Nickel Foam Substrate, Proceedings of 2011 International Annual Corrosion Conference and Exposition (NACE), March 13-17, 2011 Houston, TX, USA.
  • G. Karami, S. Shankar, F. Azarmi, and M. Ziejewski, Micromechanical Hyperelastic Modeling of Bi-directional Oriented Axons in Brain White Matter, Proceedings of IMECE 2010, 2010 ASME International Mechanical Engineering Congress & Exposition, November 12-15, 2010 Vancouver, British Columbia, Canada.
  • R. Sarkar, R. Banerjee, G. Karami, and F. Azarmi, Micromechanical Model for Examination and Characterization of Interfacial Response of Fibrous Composites, Proceedings of IMECE 2010, 2010 ASME International Mechanical Engineering Congress & Exposition, November 12-15, 2010 Vancouver, British Columbia, Canada.
  • F. Azarmi, G. Karami, A Computational Approach for Thermo-mechanical Characterization of Thermal Spray Coatings, 3rd International Conference on Advanced Computational Engineering and Experimenting, June 21-24, 2009.
  • F. Azarmi, T.W. Coyle, J. Mostaghimi, Predict Flexural Rigidity of Sandwich Structures using Mechanical Properties of the Constituents, Proceedings of the 2009 International Thermal Spray Conference: Modeling and Simulation, ITSC, May 2009, (456-462), Las Vegas, USA.

 

Book & Book Chapters

  • F. Azarmi and C. Leither, Fundamentals of Visual Communications for Engineers with CreoTM Parametric 2.0, 1st Edition. Kendall Hunt Publishing Company, ISBN: 978-1-4652-3064-5, 360 pages, 2013. (Textbook).
  • F. Azarmi, Sandwich structures for High Temperature Applications: Microstructural Development and Mechanical Performance, U of T Publishing, ISBN: 0494398787,  208 pages, 2008.
  • H. R. Salimi Jazi, F. Azarmi, T. W. Coyle and J. Mostaghimi, Study of The Relationship between the Young's Modulus and Microstructure of Vacuum Plasma Sprayed Boron Carbide, in Mechanical Properties and Performance of Engineering Ceramics and Composites: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, Ceramic Engineering and Science Proceedings, Volume 26, Number 2, pp. 235-244, Wiley, 2006.

This Web page represents the views of the author and not necessarily those of North Dakota State University.
NDSU is not responsible or liable for its contents.