Large Gear Department of Mechanical Engineering
NDSU Home ·
Phonebook ·
Dept Forms ·
Image Holder Image Holder Image Holder Image Holder
Publications - Dr. Alan Kallmeyer

Journal Articles

Naik, R. A., Lanning, D. B., Nicholas, T., and Kallmeyer, A. R., “A Critical Plane Gradient Approach for the Prediction of Notched HCF Life,” International Journal of Fatigue, Vol. 27, 2005, pp. 481 – 492.

Erickson, M. D., Kallmeyer, A. R., and Kellogg, K. G., “Effect of Temperature on the Low Velocity Impact Behavior of Composite Sandwich Panels,” Journal of Sandwich Structures and Materials, Vol. 7, No. 3, May 2005, pp. 245 – 264.

Kellogg, K. G., Patil, R., Dutta, P. K., and Kallmeyer, A. R., “Effect of Load Rate on Notch Toughness of Glass FRP Subjected to Moisture and Low Temperature,” International Journal of Offshore and Polar Engineering, Vol. 15, No. 1, March 2005, pp. 54 – 61.

Kellogg, K. G., Kallmeyer, A. R., and Dutta, P., “Influence of Moisture and Reduced Temperature Thermal Cycles on the Izod Notch Toughness of a Pultruded Glass Fiber Composite,” International Journal of Offshore and Polar Engineering, Vol. 13, No. 3, September 2003, pp. 232-239.

Kallmeyer, A. R., Krgo, A., and Kurath, P., “Evaluation of Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4V,” ASME Journal of Engineering Materials and Technology, Vol. 124, No. 2, April 2002, pp. 229-237.

Kallmeyer, A. R. and Stephens, R. I., “A Finite Element Model for Predicting Time-Dependent Deformations and Damage Accumulation in Laminated Composite Bolted Joints,” Journal of Composite Materials, Vol. 33, No. 9, 1999, pp. 794-826.

Kallmeyer, A. R. and Stephens, R. I., “Creep Elongation of Bolt Holes Subjected to Bearing Loads in a Polymer Matrix Composite Laminate,” Composite Materials:  Fatigue and Fracture (Sixth Volume), ASTM STP 1285, E. A. Armanios, Ed., American Society for Testing and Materials, 1997, pp. 452-467.

Kallmeyer, A. R. and Stephens, R. I., "Constant and Variable Amplitude Fatigue Behavior and Modeling of an SRIM Polymer Matrix Composite," Journal of Composite Materials, Vol. 29, No. 12, 1995, pp. 1621-1648.

Kallmeyer, A. R. and Stephens, R. I., "Low Cycle Fatigue Behavior and Variable Amplitude Fatigue Life Calculations for an SRIM Polymer Matrix Composite," SAE Paper No. 930405, Journal of Materials and Manufacturing (SAE Transactions), Vol. 102, Section 5, 1993, pp. 485-495.

Book Chapters/Appendices

Kallmeyer, A., “Estimation of HCF Threshold Stress Levels in Notched Components,” Appendix E in High Cycle Fatigue: A Mechanics of Materials Perspective by Theodore Nicholas, Elsevier Science, 2006.

Conference Proceedings

Joneson, A., Kallmeyer, A., Yazdani, S., and Mallick, K., "Fatigue Induced Microcraking in Composite Tank Laminates," Proceedings of the 9th International Fatigue Congress, Atlanta, GA, May 2006.

Erickson, M., Kallmeyer, A., Goodin, E., Torkelson, E., and Kurath, P., “An Evaluation of Multiaxial Fatigue Data from Ti-6Al-4V using a Critical Plane Methodology,” Proceedings of the 9th International Fatigue Congress, Atlanta, GA, May 2006.

Ryan, K., Cronin, J., Arzberger, S., Mallick, K., Munshi, N., Yazdani, F., Kallmeyer, A., Arritt, B., and Welsh, J., “Prediction of Pressure Cycle Induced Microcrack Damage in Linerless Composite Tanks,” Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA 2006-2201, Newport, Rhode Island, May 2006.

Okeson, M., Kellogg, K., and Kallmeyer, A., “Impact Damage Growth in Fiberglass/Epoxy Laminates Subjected to Moisture and Low Temperature Thermal Cycling,” Proceedings of the Sixteenth International Offshore and Polar Engineering Conference, San Francisco, CA, May 2006.

Kallmeyer, A., Goodin, E., and Kurath, P., “Load Path Dependence on the HCF/LCF Interaction Effect under Multiaxial Loadings,” Proceedings of the 10th National Turbine Engine High Cycle Fatigue Conference, New Orleans, March 2005 (abstract).

Kellogg, K. G., Patil, R., Dutta, P. K., and Kallmeyer, A. R., “Moisture and Low Temperature Effects on Hopkinson Bar Notch Toughness in Glass FRPs,” Proceedings of the Fourteenth International Offshore and Polar Engineering Conference, Toulon, France, May 2004.

Goodin, E., Kallmeyer, A., and Kurath, P. “Evaluation of Nonlinear Cumulative Damage Models for Assessing HCF/LCF Interactions in Multiaxial Loadings,” Proceedings of the 9th National Turbine Engine High Cycle Fatigue Conference, North Carolina, March 2004.

Goodin, E., Kallmeyer, A., and Kurath, P. “Cyclic Event Identification and Fatigue Damage Assessment for Multiaxial Mission Loadings,” Proceedings of the 8th National Turbine Engine High Cycle Fatigue Conference, California, April 2003.

Goodin, E., Kallmeyer, A., and Kurath, P. “Multiaxial Fatigue Evaluation of Ti-6Al-4V under Simulated Mission Histories,” Proceedings of the 7th National Turbine Engine High Cycle Fatigue Conference, Florida, May 2002.

Kallmeyer, A. R., Krgo, A., and Kurath, P., “Multiaxial Fatigue Life Prediction Methods for Notched Bars of Ti-6Al-4V,” Proceedings of the 6th National Turbine Engine High Cycle Fatigue Conference, Florida, 2001.

Kellogg, K. G., Kallmeyer, A. R., and Dutta, P. K., “Effects of Low Temperature Thermal Cycling and Moisture on Izod Notch Toughness of a Glass FRP,” Proceedings of the Tenth International Offshore and Polar Engineering Conference, Seattle, 2000.

Krgo, A., Kallmeyer, A. R., and Kurath, P., “Evaluation of HCF Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4,” Proceedings of the 5th National Turbine Engine High Cycle Fatigue Conference, Arizona, 2000.

Kellogg, K. G., Kallmeyer, A. R., Chinman, R. B., and Dutta, P. K., “Influence of Moisture and Low Temperature on Notched Izod Impact Toughness in a Pultruded Reinforced Composite,” Proceedings of the Ninth International Offshore and Polar Engineering Conference, Brest, France, 1999.

Kallmeyer, A. R. and Stephens, R. I., "Creep of Bolted Joints in a Polymer Matrix Composite Laminate," Proceedings of the Fourth Annual Iowa Space Conference, Iowa City, Iowa, November, 1994, pp. 413-422.

 

Page Last Modified: November 16, 2007
Web Master: Tiffany Neuharth
Published By: NDSU's Mechanical Engineering Department
Located At: Dolve Hall Room 111 - Fargo, North Dakota 58102
Telephone: 701-231-8671, Fax: 701-231-8913