Large Gear Department of Mechanical Engineering
NDSU Home ·
Phonebook ·
Dept Forms ·
Image Holder Image Holder Image Holder Image Holder
Publications - Dr. Ghodrat Karami

Books

G. Karami, A Boundary Element Method For Two-dimensional Contact problems, Springer-Verlag, Berlin, 1988.

G. Karami, An Introduction to Boundary Elements Method (in Persian), Shiraz University Press. 1990.

G. Karami, Principles of Linear and Nonlinear Continuum Mechanics (to be published).

 

Peer-Reviewed Journal Papers

G. Karami, Grundman, N. Abolfathi, N. Naik, A. and Ziejewski M., A micromechanical hyperelastic modeling of brain white matter under large deformation, Journal of the Mechanical Behavior of Biomedical Materials (2008),doi:10.1016/j.jmbbm.2008.08.003

N. Abolfathi, A. Naik, G. Karami and C. Ulven, A Micromechanical Characterization of Angular Bidirectional Fibrous Composites, Computational Materials Science, (2008), doi:10.1016/j.commatsci.2008.03.017

N. Abolfathi, M. Sotudeh, A. Naik, G. Karami and M. Ziejewski, A micromechanical procedure for the anisotropic modeling of mechanical properties of brain white matter, Computer Methods in Biomechanics and Biomedical Engineering, submitted, accepted for publication (2008).

X. Ren, G. Karami and M. Ziejewski, Biomechanical Simulation of human brain under explosion shock waves, J. of Medical Engineering & Physics, accepted for publication, 2008.

Naik, N. Abolfathi, G. Karami and M. Ziejewski, Micromechanical Viscoelastic Characterization of Fibrous Composites, Journal of Composite Materials, 42(12); 1179-1204, 2008

P. Malekzadeh, G. Karami, Large amplitude flexural vibration analysis of tapered plates with edges elastically restrained against rotation using DQM, J of Engineering Structure, accepted for publication (2008, doi:10.1016/j.engstruct.2008.03.016)

P. Malekzadeh, M. Farid, P. Zahedinejad, G. Karami, Three-dimensional free vibration analysis of thick cylindrical shells resting on two-parameter elastic supports, Journal of Sound and Vibration, 2008, 313(3-5), 655-675

M. R. Hematiyan and G. Karami, A meshless boundary element method formulation for transient heat conduction problems with heat sources, Scientia Iranica, 15, 348-359, 2008.

G. Karami and R. Pieri, From Continuum-based to Multiscale-based Engineering Mechanics Education, Int. J. of Engineering Education, 2007, 23 (3), 582-590.

N. Abolfathi, G. Karami and M. Ziejewski, Biomechanical Cell Modeling under Impact Loading, International Journal of Modeling and Simulation, 2008 (in press)

P. Malekzadeh, and G. Karami, A mixed differential quadrature and finite element free vibration and buckling analysis of thick beams on two-parameter elastic foundations, J. Applied Mathematical Modeling, Volume 32, Issue 7, July 2008, Pages 1381-1394

M. Ziejewski, G. Karami and A. Akhatov, Selected Biomechanical Issues of Brain Injury Caused by Blasts, Brain Injury Professional, 2007;4(1), 10-15.

P. Malekzadeh,  and G. Karami,  Differential quadrature large deformation analysis of skew composite plates based on FSDT, J. of Engineering Structures, 2006, 28, pp.1307-1318.

P. Malekzadeh, G. Karami and S. Mohebpour, DQM free vibration analysis of moderately thick symmetric laminated plates with elastically restrained edges,  J. of Composite Structures, Volume 74, Issue 1, July 2006, Pages 115-125 2006.

P. Malekzadeh, H. Rahideh and G. Karami, Optimization of convective–radiative fins by using differential quadrature element method, Energy Conservation and Management, Volume 47, Issues 11-12, July 2006, Pages 1505-1514.

P. Malekzadeh, H. Rahideh, and G. Karami, A Differential Quadrature Element Method for Nonlinear Transient Heat Transfer Analysis of Extended Surfaces, J. of Numerical Heat Transfer, 2006; 49,511-523.

G. Karami and M. Garnich, Micromechanical Study of Thermoelastic Behavior of Composites with Periodic Fiber Waviness, J of Composites Part B: Engineering, Volume 36, Issue 3, April 2005, Pages 241-248.

G. Karami and M. Garnich,  Effective Moduli and Failure Considerations for Composite with Periodic Fiber Waviness, J. of Composite Structures, Volume 67, Issue 4, March 2005, Pages 461-475.

M. Garnich and G. Karami Localized Fiber Waviness and Failure in Unidirectional Composites, J. of Composite Materials. 2005; 39 (14): 1225-1246.

P. Malekzadeh and G. Karami, Polynomial and harmonic differential quadrature methods for free vibration of variable thickness thick skew plates, J. of Engineering Structures, 2005;27(10):1563-1574.

P. Malekzadeh, G. Karami and M. Farid, A semi-analytical DQEM for free vibration analysis of thick plates with two opposite edges simply supported, J. of Computer Methods in Applied Mechanics and Engineering, Volume 193, Issues 45-47, 12 November 2004, Pages 4781-4796.

M. Garnich, and G. Karami, Finite Element Micromechanics for Stiffness and Strength of Wavy Fiber Composites.  J. of Composite Materials, 38(4); 273-292, 2004.

A.R. Setoodeh, and G. Karami, Static, free vibration and buckling analysis of anisotropic thick laminated composite plates on distributed and point elastic supports using a 3-D layer-wise FEM, J. of Engineering Structures, 2004;26(2):211-220. 

P. Malekzadeh and G. Karami, Vibration of non-uniform thick plates on elastic foundation by differential quadrature method, J. of Engineering Structures, 2004;26(10):1473-1482.

P. Malekzadeh and G. Karami, in plane free vibration analysis o circular arches with varying cross sections, Journal of Sound and Vibration. 2004;274:777-799.

P. Malekzadeh and G. Karami, Out-of Plane analysis of circular arches by DQM, Int. J. of Solids and Structures, 2003; 40;6527-6545.

G. Karami and A.R. Setoodeh, A solution for the vibration and buckling of composite laminates with elastically restrained edges, J. Composite Structures, 2003;60(3):245-253.

G. Karami and P. Malekzadeh, An efficient differential quadrature methodology for free vibration analysis of arbitrary straight-sided quadrilateral thin plates J. Sound and Vibration, 2003;263:425-442.

H.M. Zbib, M. Shehadeh, S. Khan and G. Karami, Multiscale Dislocation Dynamics Plasticity, Int. Journal for Multiscale Computational Engineering, 2003;1(1):75-91.

G. Karami and P. Malekzdeh, DQEM for free vibration analysis of Timoshenko beams on elastic foundations, Journal of Computational Mechanics, 2003;31(3/4): 219-228.

G. Karami, P. Malekzadeh, and S.A Shahpari, A DQEM for vibration of shear deformable nonuniform beams with general boundary conditions. J. of Engineering Structures, 2003;25(9):1169-1178. 

G. Karami, S. Ali Shahpari and P. Malekzadeh, DQM analysis of skewed and trapezoidal laminated plates, J. Composite Structures. 2003; 59(3):391-400.

G. Karami and P. Malekzadeh, Application of a new differential quadrature methodology for free vibration analysis of rectangular plates, Int. J. for Numerical Methods in Engineering. 2003;56(3):847-868.

M.R. Hematiyan and G. Karami, A Boundary Element Formulation for Inverse Analysis of Solidification Problems Using Pseudo Heat Source Method, Journal of Computational Mechanics, 31(3/4), 262-271, 2003.

G. Karami and P. Malekzadeh, An efficient differential quadrature methodology for free vibration analysis of arbitrary straight-sided quadrilateral thin plates J. Sound and Vibration, 2002.

G. Karami and P. Malekzadeh, Application of a new differential quadrature methodology for free vibration analysis of rectangular plates, Int. J. Numerical Methods in Engineering, 2002

G. Karami and P. Malekzadeh, Static and Stability Analysis of Arbitrary Straight-sided Quadrilateral Thin Plates by DQM, Int. J. Solids & Structures, 39(19) pp. 4927-4947, 2002.

G. Karami and P. Malekzadeh, A new differential quadrature methodology for beam analysis and the associated DQEM", Computer Methods in Applied Mechanics and Engineering, 191(32), 3509-3526, 2002.

G. Karami and P. Malekzadeh, A Variational based Modeling for Energy Release Rate Fiber/Matrix Interfacial Fracture, Composite and Structures, 55, No.2, pp.185-194, 2002.

G. Karami and F. Niknam Moghaddam, Themoelastic contact analysis of a monolayer welded pressure vessel using interface elements, Scientia Iranica, 18, 2002.

M. Hemayati and G. Karami, A Boundary Elements and Particular Integrals Implementation for Thermoelastic Stress Analysis, Int. J. of Engineering, 15, 2001.

G. Karami, and D. Derakhshan, Field Boundary Element Method for Large deformation Analysis of hyperelastic problems, Scientia Iranica, 20, pp441-452, 2000.

G. Karami, and M.R. Hematiyan, A boundary element method of inverse non-linear heat conduction analysis with point and line heat sources, Communication in Numerical Methods Engineering. 16, pp. 32-53, 2000.

G. Karami, and M.R. Hematiyan,  Boundary Elements Analysis of Nonlinear Heat Conduction Problems with Line and Distributed Sources employing Analytical Integration, Numerical Heat  Transfer, 38(4), 2000.

G. Karami and A.R. Setoudeh, Development of a degenerated element tangent stiffness matrix in large deformation analysis, Asian J. of Civil Engineering, 1, No. 3, pp 71-79, 2000.

G. Karami, and M.R. Hematiyan, Field Boundary Element Formulation of Materially Nonlinear and Large Deformation Analysis, Iranian J. of Science and Technology, 21, pp 229-252, 1997.

G. Karami, H. Zohari and K. Hematian, Stress distribution analysis of bias tires, an investigation into the foot-print and contact loading using finite element method, Rubber Magazine, 2, No. 5, pp. 5-12, 1997.

G. Karami, and Y. Daneshbod, Elastic wave Propagation in Anisotropic Laminates, J. of. Mechanical Engineering Trans. ISME, 1, pp. 32-53, 1997.

G. Karami, H. Zohari and E. Setoudeh, Stress Distribution Change in Bias Tires due to Change in Cord Angle, A Finite Element Analysis, Kautschuk Gummi KunstStoffe(J. of Rubber  Materials),  5, pp.450-455, 1998.

G. Karami, and M.R. Sharifi-Jah   Failure Analysis of Laminated Composite Pinned connections, Scientia Iranica, 6, pp 86-100, 1999.

G. Karami, and D. Derakhshan, An Efficient Method to Evaluate Hypersingular and Supersingular Integrals in Boundary Integral Equations Analysis, J. Engineering Analysis with Boundary  Elements,  23, 317-326,1999.

G. Karami J. Zarinchang and B. Foroughi, An analytical Treatment of Boundary Integrals in Direct Boundary Element Analysis of Plate Bending Problems, Int. J. Numerical Methods in Engineering, 37, 2409-2427, 1994.

G. Karami and S. Ghazanfari Oskooei, A Thermoelastic Analysis of Shrink - fit Type Constructions by Boundary Element Method, Int. J. Computers and Structures. 53, 1373-1379, 1994.

G. Karami J. Zarinchang, R Satourians Eraghi and H Kazeminejad, A Finite Element Method for EHL Analysis of Spherical bodies, Communications in Applied Numerical Methods, 10, 501-510, 1994.

G. Karami, and G. Kuhn, A finite element-boundary element treatment for the analysis of elastohydrodynamic lubrication problems, Computational Mechanics, 14, 289-297, 1994.

G. Karami, and G. Kuhn, Body-Force Linear Elastic Stress Intensity Factor Calculation Using Boundary Element Method, Int. J. Computers and Structures, 49, 107-115, 1993.

G. Karami, Boundary Element Analysis of Two-dimensional Elasto-Plastic Contact Problems, Int. J. Numerical Methods in Engineering, 36,221-236, 1993.

M.A.Yaghoubi, G. Karami and A.A. Karimi, A Boundary Element Modeling for Two - Dimensional Transient Heat Conduction, Nuclear Engineering and Design, 135, 2277-285, 1992.

G. Karami, and G. Kuhn, Implementation of Thermoelastic Forces in Boundary Element Analysis of Fracture and Contact Problems, J. Engineering Analysis with Boundary Elements, 10, 313-322, 1992.

G. Karami, Boundary Element Method For Elasto-Plastic Stress Analysis of Contact Problems, Int. J. Computers and Structures, 41, 927-935,1991.

M.R.Banan, G. Karami and M. Farshad, Nonlinear Theory for Elastic Spatial Rods, Int. J. of Solids and Structures, 27, pp 713-724, 1991.

G. Karami, M.R. Banan and M. Farshad, Pretwisted Rods- An Efficient Finite Element Modeling, J. of Finite Element in Analysis and Design, 9, pp 77-85, 1991.

G. Karami and M. Farshad and M.R. Banan, Spatial Buckling of Arches- A Finite Element Analysis, Int. J. of Computers and Structures, 34, pp. 565-576,1990.

M.R. Banan, G. Karami and M. Farshad, A Finite Element Stability Analysis of Curved Beams on Elastic Foundations, Mathematical and Computational Modeling, 14, 863-867, 1990.

G. Karami and M. Farshad, Earthquake Analysis of Spatial Rod Systems, J. of Engineering analysis, 3, 134-147, 1990.

G. Karami, Pseudo-Body Force Boundary Element Method for Thermoelastic Problems, Mathematical and Computational Modeling, 14, 883-887, 1990.

G. Karami, M. Farshad and M. Yazdchi, Free Vibration of Spatial Rods- A Finite Element Analysis, Communication in Applied Numerical Methods. 6, pp 417-428, 1990.

Dyson, H.P. Evans, G. Karami, M.C. Paliwal and R.W. Snidle, Scuffing Failure of Steel Discs: Conditions for the Failure of Elastohydrodynamic Lubrication, Proc. Instn. of Mechanical Engineers., 204, pp 91-97, 1990.

G. Karami and M. Hakimhashemi, Application of Boundary Element Method to Two Dimensional Poisson's Equation, J. of Engineering Analysis, 2, 85-97, 1989.

G. Karami, Elastohydrodynamic Lubrication of Rollers Having Sinusoidal Roughness: Effect of Entraining Oil Velocity, Iranian J. of Science and Technology, 12, pp 56-67, 1989.

M. Farshad, G. Karami and M.R. Banan, A Theoretical and Numerical Finite Element Analysis of Spatial Rod Systems, Computer Methods in Applied Mechanics and Engineering., 73, pp. 111-132, 1989.

M.R. Banan, G. Karami, and M. Farshad, Finite Element Analysis of Curved Beams on Elastic Foundation, Int. J. of Computers and Structures, 32, pp 45-53, 1989.

G. Karami and R.T. Fenner, Application of Boundary Integral Equation Method to Two Dimensional Elastic Contact Problems Using Isoparametric Quadratic elements, Iranian J. of Science and Technology, 11, pp 65-76, 1988.

G. Karami, H.P. Evans, and R.W. Snidle, Elastohydrodynamic Lubrication of Circumferentially Finished Rollers Having Sinusoidal Roughness, Proc. Instn. of Mechanical Engineers, 201, No. Cl, 1987.

G. Karami, and R.T. Fenner, Analysis of Mixed Mode Fracture and Crack Closure Using the Boundary Integral Equation Method, Int. J. of Fracture, 30, pp. 15-31, 1986.

 

Peer-Reviewed Published Papers in Conference Proceedings

N. Abolfathi, A. Naik, G. Karami, and M. Ziejewski, Adhesion influence in load transferring of axons embedded in extra cellular matrix (ECM) in brain tissue, EM08: International Conference of the Engineering Mechanics, May 2008, Minneapolis.

N. Abolfathi, A. Naik, G. Karami, and M. Ziejewski, Brain tissue modeling and load transfer characteristics of axons, EM08: International Conference of the Engineering Mechanics, May 2008, Minneapolis.

G. Karami and R. Pieri, Implementation of Multiscale View and Modules in Engineering Mechanics Courses, ASEE 2008, Pittsburg, PA, June 2008.

G. Karami, Multiscale Mechanics and Undergraduate Engineering Education, CCLI Conference, August 2008, Washington DC.

N. Abolfathi, A. Naik, M. Sotudeh, G. Karami, M. Ziejewski, Diffuse Axonal Injury And Degradation In Mechanical Characteristics Of Brain White Matter Proceedings of the ASME 2008 Summer Bioengineering Conference (SBC2008), June 25-29, Marriott Resort, Marco Island, Florida, USA, SBC2008-192251

M. Sotudeh-Chafi, N. Abolfathi, A. Nick, V. Dirisala, G. Karami and M. Ziejewski, A Multi-scale Finite Element Model for Shock Wave-induced , Axonal Brain Injury SBC2008-192342, Proceedings of the ASME 2008 Summer Bioengineering Conference (SBC2008), June 25-29, Marriott Resort, Marco Island, Florida, USA

M. Sotudeh Chafi, G. Karami, Mariusz Ziejewski, Simulation of Blast-Head Interactions to Study Traumatic Brain Injury. Paper IMECE2007-41629, Proceedings of IMECE 2007, 2007 ASME International Mechanical Engineering Congress and R&D Expo, November 11-15, 2007 Seattle, Washington, USA

G. Karami and R. Pieri, engineering education and elementary multiscale mechanics, paper: AC 2007-1702, ASEE 2007 Conference, Honolulu, June 24-27 2007.

R. Pieri, and G. Karami, Introduction of nanotechnology into fundamental engineering classes: how to think small in a good way! Paper AC 2007-1801 ASEE 2007 Conference, Honolulu, June 24-27 2007.

Naik, N. Abolfathi, G. Karami and M. Ziejewski, Micromechanical Viscoelastic Characterization Of Composites, Plasticity Conference 2007, June 2-6, Alaska.

N. Abolfathi, G. Karami and M. Ziejewski,  Brain Cell Modeling Under Impact Loading – Combined Tensigrity and Continuum Modeling,  Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC2007), June 20-24, Keystone Resort & Conference Center, Keystone, Colorado, USA

N. Abolfathi, G. Karami and M. Ziejewski,  Micromechanical Analysis of Tissues – The effect of cell adhesion to extra Cellular Matrix (ECM),  Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC2007), June 20-24, Keystone Resort & Conference Center, Keystone, Colorado, USA

M. Sotudehchafi, G. Karami, M. Ziejewski, AN Assessment of Primary Blast Injury In Human Brains- A Numerical Simulation Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC2007), June 20-24, Keystone Resort & Conference Center, Keystone, Colorado, USA.

M. Sotudehchafi, G. Karami, M. Ziejewski, Finite Element-based Characterization of Blast-Related Traumatic Brain Injury, NABIS 5th Annual Brain Injury Conference, San Antonio, TX, 2007.

M. Ziejewski, I. Akhatov, G. Karami. "The Contribution of Biomechanical Factors Including Blast to Traumatic Brain Injury,” The New York Academy of Traumatic Brain Injury Tenth Annual Conference, Polytraumatic Wounds of War and Terrorism, New York, NY March 23-24, 2007.

G. Karami and Robert Pieri, Multiscale-based Mechanical Engineering Education, ASME 2006 Conference Paper # IMECE2006-13215 , Chicago.

Delong Li, M. Ziejewski, and G. Karami, The parametric studies of Brain Materials in the Analysis of Head Impact ASME 2006 Conference Paper #IMECE2006-15596 , Chicago.

G. Karami, R. Pieri Multiscale-based Mechanical Engineering Education, IMECE2006 Conference Chicago, 2006.

Delanog, Ziejewski, and G. Karami, The parametric studies of Brain materials in the analysis of head impact, IMECE200 conference, Chicago,2006.

G. Karami, An equivalent continuum-atomistic characterization model for nanographitic materials, IMECE 2005 Conference, Orlando, FL Nov. 2005.

G. Karami, and M. Garnich, A micromechanics algorithm for measuring residual thermal stresses in fibrous composites SAMPE 2004 Conference, Long Beach, CA. USA.

G. Karami, E. Schwingler and H. Nazari, evaluation of residual thermal stresses of fibrous composites Proceedings of IMECE’2004, 2004 ASME International Mechanical Engineering Congress and R&D Expo, November 2004 Anaheim, CA., USA.

M. Garnich and G. Karami, Micromechanics of Wavy Fibers relating to strength analysis of composites, SAMPE 2003 Conference, Long Beach, CA., USA.

G. Karami, P. Malekzadeh and G. Kuhn.  A modeling for energy release rate of fiber/matrix interface fracture based on variational approach, proceeding of the American Society of Composites (ASC) 16th Technical Conference, paper 235, Virginia, September 2002.

G. Karami and M. Hemayati, A Particular Boundary Integrals Boundary Elements Analysis for Thermoelasticity, ISME conference, Rasht, Gulian, May 2001.

G. Karami and P. Malekzadeh, A New Model for Energy Release Rate Fiber/Matrix Interfacial Fracture Using Compliance Method, ISME Conference, Rasht, Guilan, May 2001.

G. Karami, F. Manetqi and G. Ghanbari, A systematic view how to design a ship unloader for bag loads, Proc. 1st SISME 2000 conference, Semnan, Iran,  pp. 213-226, Nov. 13-15, 2000.

G. Karami, and M.T. Maleki Sarvestani, F. Manteqi, F. Niknam, M. Hossaini and G. Ghanbari, A Systematic view how to design a ship unloader for Bag Loads, Proc.4th ICOMPAS Conference, November 2000, Bandar Abbas, Iran.

G. Karami, and M.T. Maleki Sarvestani, Design of spiralveyor system equipped with a telescopic conveyor for a ship-unloader, Proc.  4th ICOMPAS Conference, November 2000, Bandar Abbas, Iran

G. Karami, and D. Derakhshan, Boundary Elements in Large Deformation and Nonlinear Analysis, Proc. of 5th Civil Eng. Conference, Mashad University, June 2000, Mashad, Iran.

G. Karami and F. Niknam Moghaddam, Employment of Interface Elements in Elastic and thermoelastic Contact Analysis ISME-2000 Conference, Sharif University of Tech., Tehran, June 2000.

M.R. Hematiyan, and G. Karami Inverse transient Boundary Elements analysis of Heat Conduction Problems with Heat Sources, ISME-2000 Conference, Sharif University of Tech., Tehran, June 2000.

G. Karami and M.R. Hematiyan, An Accurate Boundary-Only BEM Formulation of Heat Conduction Problems with Domain Loading, ISME-2000 Conference, Sharif University of Tech., Tehran, June 2000.

G. Karami, and D. Derakhshan, Field Boundary Element Method for Large Deformation Analysis of Hyperelastic Problems, Proc. of BEM 21 Conference, Oxford University, August 1999, Oxford, England.

G. Karami, and P. Malekzadeh, Continuum-based thermoelastic analysis of Thin Shells, Proc. Third Iranian Mechanical Engineering Conference June 1998, Tehran, Iran.

G. Karami, F. Niknam, M. Lashkari and E. Setoudeh, Hyperelastic Analysis of Steel belted tires, Proc. Third Iranian Mechanical Engineering Conference, June 1998, Tehran, Iran.

R. Hematyan and G. Karami, Nonsymmetrical Coupling of Boundary Elements and Finite Elements in Conduction Analysis Proc. Fourth Annual Mechanical Engineering Conference May 14-17, 1996, pp. 27-34, Shiraz, Iran.

G. Karami, M.H. Kadivar and K. Sepahvand, Shape optimization in conjunction with Boundary Elements Analysis of two-dimensional bodies, Proc. Third Iranian Mechanical Engineering Conference June 1998, Tehran, Iran.

G. Karami, Zohari H., and Setoudeh E. Footprint analysis of bias tires under inflation and working load by Finite Element Method, Proc. IRC'97, Kuala Lumpur, pp. 587-593, 1997.

G. Karami, Zohari H., and Setoudeh E. Stress Distribution Change in Bias Tires due to Change in Cords angle- A Finite Element Analysis, Proc. IRC'97, Kuala Lumpur, pp. 613-621, 1997.

G. Karami and S. Ghazanfari Oskooei, A Boundary Element Analysis for Shrink-fit Type Problems, proceeding of the second European joint conference on Engineering systems Design and Analysis, ESDA, July 4-7, 1994, London England.

G. Karami and H. Kazeminejad, A Combined FEM and BEM for the Analysis of EHL Problems, Proc. IACM, WCCM III, the Third world Congress on Computational Mechanics, Vol. II, 1858-1860, (1994).

B. Foroughi, G. Karami and J. Zarinchang, Boundary Element Analysis of Plate bending Problems, Proc. Int. Congress on Computational Methods in Engineering, Vol. 3, pp. 3-10, 1993, Shiraz- Iran.

G. Karami and G. Kuhn, Boundary Element-Finite Element Elastohydrodynamic Lubrication analysis of Bearings, IABEM-93 Conference Proceeding, August 16-19, 1993,Braunschweig, Germany.

G. Karami, J. Zarinchang, R. Satourians Eraghi, and H. Kazeminejad, Finite Element Elastohydrodynamic Lubrication analysis of Spherical Bearings, Proc. Int. Congress on Computational Methods in Engineering, Vol. 3, 123-130, 1993, Shiraz-Iran.

M.A, Yaghoubi, G. Karami and A. A. Karimi, The use of boundary element method in transient heat conduction, Proc. International Conference on Engineering Applications of Mechanics, Volume 1, (Ed. A. Meghdari), pp 234-243, 1992, Sharif University of Technology, Tehran, Iran.

G. Karami and S. Ghazanfari Oskooei, A quadratic boundary element formulation for elstoplastic contact problems, proc. of the International Conference on Engineering Application of Mechanics, Volume 2, (Ed. A. Meghdari), pp131-138, 1992, Sharif University of Technology, Tehran, Iran.

G. Karami, and G. Kuhn, Thermoelastic and elastoplastic BEM analysis of Contact Problems, IABEM-92 Conference, University of Colorado-Boulder, August 1992

G. Karami, J. Zarinchang, B. Foroughi, and G. Kuhn, An efficient analytical treatment of boundary integrals in BEM analysis of plate bending problems, in Boundary Element XIV, Vol 2: Stress Analysis and Computational Aspects (Eds. C.A. Brebbia, J. Dominguez, and F. Paris), 627-638, Elsevier Applied Science, London, 1992.

G. Karami, Boundary element method applied to contact problems, DFG Kolloquium des Schwerpunkts Randelementmethoden, August 1991, Gunzburg, Germany.

G. Karami, A Boundary element Method for Plate Bending, proceeding of 3rd International Iranian Congress of Civil Engineering, University of Shiraz, Shiraz May 14-17, 1990.

G. Karami, A Boundary element Formulation for Two-Dimensional Elasto-Plastic Contact Stress analysis, proceeding of the 3rd International Iranian Congress of Civil Engineering, University of Shiraz, Shiraz, May 14-17, 1990.

G. Karami, Thermo-Elastic BEM analysis by Pseudo-Body Force Approach, in Numerical methods in Thermal Problems (Ed. R. W Lewis, and K. Morgan) Vol. VI, Part 2, 1743-1751, 1989.

G. Karami, Boundary Element Modeling for Elasto-Plastic Frictional Contact Problems, in Modern Practice in stress and Vibration Analysis, Liverpool, 3-5 April 1989.

G. Karami and M. Farshad, Finite Element Stability Analysis of Curved Elements, 21st Midwestern Mechanics Conference, Michigan Technological University, MI, August 13-15,1989.

G. Karami, Domain and Boundary Approach in Boundary Element Thermoelasticity, in Boundary Element XI (Editor C.A. Brebbia) CMP & Springer-Verlag, Berlin Heidelberg, 1989.

G. Karami, A Boundary Element Method Formulation for Elasto-plastic Contact Problems, in Boundary Element X, Vol. 2: Stress Analysis, (Editor, C.A. Brebbia) CMP & Springer-Verlag, Berlin Heidelberg, 1988.

G. Karami, Multi-Domain Boundary Element Modeling of Crack Closure Problems, in Boundary Element X, Vol. 2: Stress Analysis, (Editor, C.A. Brebbia) Springer-Verlag, Berlin, 1988.

G. Karami, Boundary Element Method for Elastic Thermoelastic Body force using Pseudobody Force Approach, in Computational Mechanics '88 Theory and Applications (Editors S.N. Atluri, and G. Yagawa), Vol. 1. Springer Verlag, New York, 1988.

G. Karami and R.T. Fenner, A Two-Dimensional BEM for Thermo Elastic Body Force Contact Problems, in Boundary Elements IX, Vol. 2: Stress Analysis, (Editors, C.A. Brebbia, W.L. Wendland, and G. Kuhn), Springer-Verlag, Berlin, and Heidelberg, 1987.

G. Karami, H.P. Evans, and R.W. Snidle, Elastohydrodynamic Lubrication of Grooved Rollers, in Fluid Film Lubrication, Osborne Reynolds Century, (editors, D. Dowson, C.M. Taylor, M.Godet and D. Berthe), Elsevier Science Publishers, Amsterdam, 1987.

G. Karami, Application of BIE to 2-Dimensional Elastic Contact Problems, presented at the lst World Congress on Computational Mechanics, September 22-26, Austin, Texas, 1986.

 

Peer-Reviewed Publications in Persian

D. Derakhshan and G. Karami, A method for regularization of singular integrals in three-dimensional Boundary Element analysis, J.  of Esteghlal, Esfahan University of Technology, Vol 17, No. 1, pp.121-123 (1998).

G. Karami and M R Hematiyan, Boundary element analysis of nonlinear heat conduction having point, or linearly distributed heat sources, J. of Esteghlal, Esfahan University of Technology, Vol 18, No. 2, pp.141-152 (1999)

G. Karami, Teaching, structural mechanics, three-dimensional and flexural theories, Iran J. of Engineering Education, Vol. 1, no.3, pp. 65-78,  (2000). 

Setoudeh and G. Karami, Determination of the stiffness matrices in large deformation analysis using degenerated elements, J. of Engineering, Ahvaz University, Vol.1, no.1 (2000).

Setoudeh and G. Karami, Large deformation analysis using degenerated elements, Iran J. of Mechanical Engineering, Trans ISME, Vol 2, No.1 (1999).

Karami, and M R Hematiyan, Coupling of finite and direct boundary elements in unsymmetric forms for nonlinear heat conduction analysis, Iran J. of Mechanical Engineering, Trans ISME, Vol 2, No.1 (1999).

Karami, and B. Joukar, Impact of an elastic body with a rigid body, the effects of the contact friction, J of Iranian Mechanical Engineers, Iran University of Science and technology,  Vol 5, pp. 102-112 (2000).

G. Karami and M R Hematiyan, Solving two types of inverse heat conduction problems by boundary elements, J. of Amirkabir, Amirkabir University of Technology , 2001.

G. Karami, M. Yaghoubi and A. A. Rezvani, Thermal analysis of tire, J. of Esteghlal, Esfahan University of Technology, Vol 22, 20001.

G. Karami and H. Tavangar, Bending Analysis of Multilayered Plates Using a Composite Element Having Layerwise In-plane Displacement, Journal of the school of Engineering, Tehran University.

G. Karami and H. Tavangar, An Investigation into the Shear Locking Phenomenon in Layerwise Theory in Plates Bending Analysis, J. of Esteghlall, Esfahan University of technology.

G. Karami and R. Koochaki, Bending analysis of multilayered composite plates using a nonconforming element based on equivalent single layertheories, J. of Esteghlal, Esfahan University of technology.

G. Karami and M. Taghi Momeni, A special beam element for composite beams analysis, J. of Esteghlal.

G. Karami A review of boundary elements applications in engineering analysis, the advantages and disadvantages in comparisons with other algorithms, Invited paper, Proc. of Third Annual Iranian Society of Mechanical Engineers Conference, Amirkabir University, June (1995).

F Ghadak and G. Karami, A method for determination of mixed mode stress intensity factor, Proc. of Fourth Annual Conference of Iranian Society of Mechanical Engineers, Shiraz University, June (1996).

D Derakhsahn and G Karami, A method for regularization of hypersingular integrals in boundary elements analysis, Proc. of Fifth Annual Conference of Iranian Society of Mechanical Engineers, Tabriz University, June (1997).

M. R. Hematiyan and G. Karami, A solution for heat transfer analysis with radiation boundary conditions, Proc. of Fifth Annual Conference of Iranian Society of Mechanical Engineer s, Tabriz University, June (1997).

Y Daneshbod and G. Karami, Wave propagation in anisotropic elastic media, Proc. of Fifth Annual Conference of Iranian Society of Mechanical Engineers, Tabriz University, June (1997).

A  Rezvani, M. Yaghoubi and G. Karami, Finite elements heat transfer analysis in tires, , Proc. of First Iranian Rubber Technology Seminar, Iran Rubber Research Engineering Co., pp. 218-233, Kerman, Iran(1998).

A  Rezvani, M. Yaghoubi and G. Karami, Determinations of Heat transfer coefficients in rubber components, Proc. of First Iranian Rubber Technology Seminar, Iran Rubber Research Engineering Co., pp. 213-217, Kerman, Iran(1998).

G Karami, F. Niknam, M. Lashkari and E Setoudeh, Finite elements hyperelastic analysis of tires, Proc. of First Iranian Rubber Technology Seminar, Iran Rubber Research Institute and Engineering Co., pp. 201-211, Kerman, Iran (1998).

G. Karami, M. Matin and Golbahar Haghighi, Dynamics analysis of mindlin plates using strip elements, Proc. of Sixth Annual Conference of Iranian Society of Mechanical Engineers, Iran University of Science and technology, Tehran, June (1998).

G. Karami, M. yaghoubi and M. Ghasemzadeh, Finite elements heat transfer analysis of cooling plates of steel furnaces, Proc. of Seventh Annual Conference of Iranian Society of Mechanical Engineers, Sistan and Baluchestan University, Zahedan, Iran, June (1999).

G. Karami, K. Alempour and A. Dehghanian, semi-monocoque analysis of a surface, Proc. of Seventh Annual Conference of Iranian Society of Mechanical Engineers, Sistan and Baluchestan University, Zahedan, Iran, pp. 169-178, June (1999).

M. R. Hematiyan, G. Karami and B. Saranjaam, Rigid beam elements and their applicabilities in structural finite elements analysis, Proc. of Seventh Annual Conference of Iranian Society of Mechanical Engineers, Sistan and Baluchestan University, Zahedan, Iran, pp. 973-982, June (1999).

G. Karami, B. Joukar and H. Javadi, The design and analysis of a hovercraft structure under dynamic loadings, Proc. of Seventh Annual Conference of Iranian Society of Mechanical Engineers, Sistan and Baluchestan University, Zahedan, Iran, pp. 491-508 June (1999).

M. Ghasemzadeh, G. Karami, and M. yaghoubi, An investigation into the materials and water flow in heat transfer analysis of cooling plates of a steel furnace, Proc. of Sixth Iranian Fluid Dynamics Conference,   vol. 3 pp. 79-87, Iran University of Science and Technology, Tehran, June (1999).

F. Niknam and G. Karami, Stress intensity factors evaluations in tires by finite elements, , Proc. of Third Iranian Rubber Technology Seminar, Iran Rubber Research Engineering Co., pp. 213-217, Tehran, Iran(2000).

G. Karami, H. Shahrabi, M. R. Ghorbani and M. Dargazi, A study on the effects of wheel profile in contact analysis of wheel and rail, Proc. of third Iranian Railway conference, Iran Railways Research and Engineering Co., pp. 95-102, Tehran, February 2000.

G. Karami, K. Alempour and A. Dehghanian, Different Rearrangements Analysis of Hovercraft compartments from stability and Strength points of view, 1st Aerodynamics Conference, August 2000, Tehran.

K Alempor, A. Dehghanian and G. Karami, Optimum dynamics analysis and design of a hovercraft, ISME conference, Rasht, Guilan, May 2001.

G. Karami and T. Doroudchi , The Dynamics analysis of a sandwich type structure under dynamics loading for Hovercraft design, ISME Conference, Rasht, Guilan, May 2001.

G. Karami and A. Tayyari, Design, Dynamics and Kinematics Analysis of a Steerable Bogie, Iran Railway Conference, January 2001, Tehran.

Page Last Modified: October 15, 2008
Web Master: Tiffany Neuharth
Published By: NDSU's Mechanical Engineering Department
Located At: Dolve Hall Room 111 - Fargo, North Dakota 58102
Telephone: 701-231-8671, Fax: 701-231-8913