Process Lab
Manufacturing Capabilities

Manufacturing Engineering Capability Sheet

• Maximum size of all shapes: 10” wide (254mm) x 12” long (304.8mm) x 12” high (304.8mm)
• Tolerance of all shapes: +/- .0005 (.0127mm)
• Maximum surface finish of all shapes: 15RMS
• Hardening, Tempering, and annealing of most ferrous and non-ferrous parts are available on a production or prototype basis up to the maximum size dimensions shown above
• Various finishing, plating and polishing techniques are also available

• Maximum size: 36” long (914.4mm) x 3” diameter (76.2mm)
• Diameter Tolerance: +/- .0001” (.00254mm)
• Length tolerance: +/- .010” (.254mm)
• Maximum surface finish of cylindrical parts: 5 RMS
• Hardening, Tempering, and annealing of most ferrous and non-ferrous parts are available on a production or prototype basis up to the maximum size dimensions shown above
• Various finishing, plating and polishing techniques are also available

• Facilities include an inspection room, a small manual Coordinate Measurement Machine and a small optical comparator
• All measuring instruments are traceable to the National Institute of Standards and Technology (NIST)

• Shear, Brake and welding operations must be evaluated on a case by case basis but machine maximum sizes are about 36”
• All welding operations are supported for prototype and production welding

• Machining Fixtures and Jigs, Welding Fixtures
• Stamping die design and construction
• Plastic injection mold design and construction

• Geometric Dimensioning and Tolerancing (GD&T) instruction
• CAD-CAM instruction using CADKEY and MasterCam
• Jig, Fixture and Tool Engineering
• Reverse Engineering
• Cost Estimating

Please contact the Manufacturing Lab at the numbers above with questions or requests.