Design and Testing

Electronics Test Equipment

TDK RF Solutions Anechoic Antenna Test Chamber Frequency Range: 700MHz - 18GHz
Agilent N5230A PNA-L Vector
Network Analyzer
Frequency Range: 300kHz - 20GHz
Agilent E4438C Vector Signal Generator Frequency Range: 250 kHz to 3 GHz, 0.1 Hz Resolution
Anritsu MG3700A Signal Generator Frequency Range: 250 kHz to 3 GHz
Agilent 1681A & 1683A Logic Analyzers 102 Channel and 34 Channel logic analyzers.
Agilent E4419B Power Meter Dual channel power meter with 10MHz - 18GHz CW power sensor.
Tektronix 3034B & 3054B Oscilloscopes 4 Channel Digital Phosphor Oscilloscope; 300MHz (Model 3034B) and 500MHz (Model 3054B) Bandwidths
Agilent 81110A Pulse Pattern Generator Pulse pattern generator with Agilent 81112A output channel; Frequency range 1MHz - 330 MHz, 3.8 Vp-p, 50 Ω
Agilent 54853 High Bandwidth Infinium Oscilloscope Four channel oscilloscope; Bandwidth 2.5 GHz
Agilent E4407B Spectrum Analyzer Frequency Range: 9kHz - 26.5 GHz
Agilent E4991A RF Impedance/Material Analyzer Frequency Range: 1 MHz - 3 GHz
Arbin Instruments Model BT2000
-More information
12 Channels, -2V to 5V Range
Tektronix RSA3408B Real-Time Spectrum Analyzer Frequency Range: DC to 8 GHz Frequency Range

Design Software

Ansoft HFSS HFSS™ provides S-parameter, Full-Wave SPICE™ extraction, and 3D electromagnetic field simulation of high-frequency and high-speed components. Engineers rely on the accuracy, capacity, and performance of HFSS to design on-chip embedded passives, IC packages, PCB interconnects, antennas, and RF/microwave components.
Ansoft Q3D A 3D parasitic extraction software tool for engineers designing multi-layer boards, complex IC packages and 3D on-chip passive components. Q3D Extractor efficiently performs the 3D and 2D electromagnetic-field simulation required for the extraction of RLCG parameters from an interconnect structure and automatically generates an equivalent SPICE sub-circuit model. These highly accurate models can then be used to perform signal integrity analysis to study EM phenomena, such as crosstalk, ground bounce, interconnect delays, and ringing, and to understand the performance of high-speed electronic designs.
Ansoft Optimetrics Optimetrics™ is a versatile, optional software program that adds parametric, optimization, sensitivity, and statistical analysis capabilities to HFSS, Q3D Extractor and Maxwell 3D. Optimetrics automates the design-optimization process for high-performance electronic devices by quickly identifying optimal values for design parameters that satisfy user-specified constraints.
Ansoft Links AnsoftLinks™ streamlines the transfer of design databases from EDA layout tools and Mechanical CAD packages into Ansoft electromagnetic field simulation products.
Mentor Graphics: Design Capture, Expedition, Hyperlynx A complete system for printed circuit board design and chip scale package substrate layout. Creates a working database of electronics components, supports schematic capture, and supports circuit board layout involving parts placement and signal routing.
Solidworks 3 dimensional mechanical computer aided design (CAD).
Ansys Multiphysics ANSYS Multiphysics software is a comprehensive coupled physics tool combining structural, thermal, computational fluid dynamics (CFD), acoustic and electromagnetic simulation capabilities in a single engineering software solution.
Ansys LS Dyna For simulating complex, nonlinear phenomena that result from processes producing deformations including electronics component drop testing.