Banner
White mold on dry bean
Photo Credit:
Michael Wunsch
Title

Improving white mold management in dry beans – Optimizing fungicide spray volume

Authored on
Body

Preliminary report from the first three years of a four-year research project. Final results are anticipated after the completion of field trials planned for the 2023 field season.

The impact of fungicide spray volume was tested with a PTO-driven tractor-mounted sprayer equipped with a pulse-width modulation system (Capstan AG; Topeka, KS). Pulse width was modified as needed to achieve the target spray volume while maintaining a constant driving speed and the same nozzles and pressure across all treatments, with pulse width calibrated on the basis of measured output immediately before spraying treatments. Topsin (40 fl oz/ac) was applied at early bloom followed by Endura (8 oz/ac) 11-14 days later. To permit overspray of plots, treatment plots were bordered by 5- or 10-foot wide non-harvested plots. On ends of each treatment plot, a non-harvested plot was established so as to permit turning on and off the sprayer at full driving speed. Dry beans were seeded to rows 14 inches apart at a seeding rate of 90,000 viable seeds/ac (pintos and kidneys) or 100,000 viable seeds/ac (blacks and navies). 

Table 1.  Detailed methods – fungicide spray volume studies

Location and year

Carrington 2020

Carrington 2021

Carrington 2022

Applic. #1

Driving speed

6.0 mph

6.0 mph

11.5 mph

Droplet size

Medium

Medium

Medium

Nozzles, pressure

XR11006, 35 psi

XR11006, 35 psi

XR11006, 35 psi

Applic. #2

Driving speed

6.0 mph

6.0 mph

8.0 mph

Droplet size

Medium

Medium

Coarse

Nozzles, pressure

XR11006, 35 psi

XR11006, 35 psi

XR11010, 30 psi

Application interval

12 days

14 days

11 days

Plot size

5 x ave. 10.9 ft

5 x ave. 16.8 ft

10 x ave. 17.8 ft

Experimental replicates

13 or 14

8

8

Increasing spray volume from 10 to 25 gal/ac had no impact on white mold severity or dry bean yield (Figure 1, all market classes; Figure 2, kidney beans only; Figure 3, pinto beans only). A weak trend of increased yield was observed (1) as spray volume increased from 20 to 25 gal/ac in navy beans in 2020 and dark-red kidney beans in 2021 and (2) as spray volume increased from 15 to 20 gal/ac in pinto beans in 2022, but the differences were not statistically significant and this trend was not observed in the other studies.  

Impact of fungicide spray volume-pinto, kidney, black, navy bean
Photo Credit:
Michael Wunsch
Impact of fungicide spray volume-pinto, kidney, black, navy bean
Dry bean spray volume-kidney bean
Photo Credit:
Michael Wunsch
Dry bean spray volume-kidney bean
Dry bean spray volume-pinto bean
Photo Credit:
Michael Wunsch
Dry bean spray volume-pinto bean

The preliminary results from the third year of this four-year project suggest that there may be little or no response to increasing fungicide spray volume from 10 to 25 gal/ac for white mold management in dry beans. Follow-up testing to evaluate the repeatability of these results is planned for the 2023 field season.

Research project funded by the Northarvest Bean Growers Association and the North Dakota Crop Protection Production Harmonization Board and Registration Board.

Michael Wunsch
Michael.Wunsch@ndsu.edu
Plant Pathologist