Materials Characterization and Analysis Laboratory
Chromatographic / Separation Methods
| M07 | Series 6890/5973 Gas Chromatograph-Mass Spectrometer | |
| C55 | Series 1100 High Performance Liquid Chromatograph | |
| C11 | Symyx Rapid GPC | |
Elemental Analysis
| M02 | CHNS-932 Combustion Analyzer + VTF-900 Oxygen Analyzer |
Resonance Methods
| M09 | ECA Series 400 MHz NMR Spectrometer (NMR) |
Spectroscopy
| M33 | Raman Spectrometer System | |
| M28 | Nicolet NXR 9650 FT-Raman Imaging System | |
| M06 | FTIR Vertex 70 Spectrometer |
Surface Characterization
| T09 | KLA Tencor Profilometer | |
| M03 | P-15 Longscan Contact / Stylus Profiler | |
| M11 | NT3300 Non-Contact Optical Profiler (OP) |
Thermal and Thermomechanical Analysis
| M12 | Q500 Thermogravimetric Analyzer (TGA) | |
| M04 | Q800 Dynamic Mechanical Analyzer (DMA) | |
| M05 | Q1000 Modulated Differential Scanning Calorimeter (DSC) | |
| M32 | Modulated Differential Scanning Calorimeter (DSC-2) | |
| M13 | Thermomechanical Analyzer 2940 (TMA) |
X-Ray Techniques
Non-Destructive Inspection
| M31 | Scanning Acoustic Microscope (CSAM) | |
| M34 | Scanning Electron Microscope (SEM) |
Cross-Sectioning
| M16 | SimpliMet 1000 Automatic Mounting Press | |
| M17 | EcoMet 3000 Grinder/Polisher | |
| M18 | Isomet 4000 Linear Precision Saw |
Accelerated Weathering and Corrosion
| C23 | Q-Fog Cyclic Corrosion Tester 600/1100 | |
| C37 | QUV Chambers with Solar Eye |
Mechanical Testing
| M21 | TriboIndenter Nanomechanical Testing System | |
| M26 | Electromechanical Testing System / Pull Tester (PT) |
Miscellaneous Measurement Equipment
| M10 | Microbalance | |
| C10 | Electrochemical Impedance Spectroscopy (EIS) | |
| C48 | Pycnometer | |
| C49 | Gas Sorption System /BET Surface Area Measurement | |
| M24 | ARES Rheometer |